How Much Does Pebblecrete Removal Cost?

How Much Does Pebblecrete Removal Cost Per Square Metre?

$25 – $58 Per Square Metre*

How Much Does It Cost To Remove Pebblecrete Per Square Metre? Pebblecrete Removal costs vary quite a lot from company to company or private contractor to private contractor. Here at Pebblecrete Removal Sydney, we guarantee that we will always be upfront with pricing, with no hidden extras.

On average Pebblecrete Removal Costs $25 Per Square Metre for jobs that require Laid On Dirt Pebblecrete Removal.

On average Pebblecrete Removal Costs $25 Per Square Metre for jobs that require Glued Pebblecrete Removed.

On average Pebblecrete Removal Costs $48 Per Square Metre for jobs that require Screed Pebblecrete Removal.

On average Pebblecrete Removal Costs $48 Per Square Metre for jobs that require Cement Pebblecrete Removal.

On average Pebblecrete Removal Costs $48 Per Square Metre for jobs that require Sand & Cement Pebblecrete Removal.

On average Pebblecrete Removal Costs $58 Per Square Metre for jobs that require Double Layer Pebblecrete Removal.

These are the factors that we take into account when quoting:
– Are there multiple layers of Pebblecrete?
– Access to the site (LIFT or STAIRS? and what LEVEL?)
– What is the subfloor (Concrete, Timber or Grass/Dirt?)
– How many square metres of Pebblecrete Removal is required
– Pebblecrete on Stairs or Skirting Boards are priced separately
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– Pebblecrete on Pillars, Ramps, Or High Rise Skirtings are priced separately
– Concrete Grinding may be required after we remove the Pebblecrete depending on the subfloor
– What installation method was used (Glued, Screed, Cement, Sand & Cement, Double Layer, Laid On Dirt)

These prices may vary depending on a large range of factors though, so please only use this as a general guide.

Is Concrete Grinding Required After Pebblecrete Removal?

Yes, if you have a CONCRETE subfloor, your Pebblecrete is most likely glued down. Once our team has removed your Pebblecrete, you will see a glue, screed or cement residue that will need to be ground off your concrete using a Concrete Grinder. We need to grind your concrete to remove any remaining residue to allow the successful reinstallation of a new flooring system, coating, or floor levelling compound.

How Much Does Concrete Grinding Cost Per Square Metre?

$10 – $90 Per Square Metre*

How Much Does Concrete Grinding Cost Per Square Metre? Concrete Grinding costs vary quite a lot from company to company or private contractor to private contractor. Here at Concrete Grinding Sydney, we guarantee that we will always be upfront with pricing, with no hidden extras.

On average Concrete Grinding Costs $10 – $60 Per Square Metre for jobs that require a General Grind.

On average Concrete Grinding Costs $10 – $90 Per Square Metre for jobs that require Glue Removed.

These are the factors that we take into account when quoting:
– How many MM may need to be ground down
– How many square metres require Concrete Grinding
– Access to the site (LIFT or STAIRS? and what LEVEL?)
– How Thick the Residue is underneath the Pebblecrete
– The condition of the concrete that requires Concrete Grinding
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– What installation method was used (Glued, Screed, Cement, Sand & Cement, Double Layer)

Other Concrete Grinding contractors and Concrete Grinding companies that Grind Concrete do not meet the standards that we do at Concrete Grinding Sydney. We use only the highest quality products that are available on the market. 

Here at Concrete Grinding Sydney, we come in and do a swift Floor Preparation and Concrete Grinding service for all of our clients, We Concrete Grind and Prime all floors before Floor Levelling to ensure a flawless installation without failure.

These prices may vary depending on a large range of factors though, so please only use this as a general guide.

How Much Does It Cost To Remove Pebblecrete From Your Stairs?

Stairs – $20 – $40 Per Step*

Landings – $40 – $80 Per Landing*

On average Pebblecrete Removal from Stairs Costs $20 – $40 Per Step for jobs that require Removal.

On average Pebblecrete Removal from Landings Costs $40 – $80 Per Landing for jobs that require Removal.

These are the factors that we take into account when quoting:
– Access to the site (LIFT or STAIRS? and what LEVEL?)
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– How many STEPS and/or LANDINGS that require Hand Grinding and/or Removal
– The SIZE of the steps (Extra Wide or Extra Long Steps may increase the prices listed above)
– What installation method was used (Glued, Screed, Cement, Sand & Cement, Double Layer)

These prices may vary depending on a large range of factors though, so please only use this as a general guide.

How Much Does It Cost To Concrete Grind Residue From Pebblecrete Stairs?

Stairs – $20 – $40 Per Step*

Landings – $40 – $80 Per Landing*

On average Concrete Grinding Stairs Costs $20 – $40 Per Step for jobs that require Hand Grinding.

On average Concrete Grinding Landings Costs $40 – $80 Per Landing for jobs that require Hand Grinding.

These are the factors that we take into account when quoting:
– How many MM may need to be ground down
– Access to the site (LIFT or STAIRS? and what LEVEL?)
– How Thick the Residue is underneath the Pebblecrete
– The condition of the concrete that requires Hand Grinding
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– How many STEPS and/or LANDINGS that require Hand Grinding and/or Removal
– The SIZE of the steps (Extra Wide or Extra Long Steps may increase the prices listed above)
– What installation method was used (Glued, Screed, Cement, Sand & Cement, Double Layer)

These prices may vary depending on a large range of factors though, so please only use this as a general guide.

How Much Does It Cost To Remove Pebblecrete From Your Skirting Boards?

$10 – $60 Per Metre*

At Pebblecrete Removal Sydney we charge $10 – $60 per metre* for the removal of Pebblecrete Skirting Boards.

These are the factors that we take into account when quoting:
– The LENGTH and WIDTH of the Skirting Boards
– Access to the site (LIFT or STAIRS? and what LEVEL?)
– How many metres require Pebblecrete Skirting Board Removal
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– What installation method was used (Glued, Screed, Cement, Sand & Cement, Double Layer)

These prices may vary depending on a large range of factors though, so please only use this as a general guide

How Much Does Concrete Grinding Skirting Boards Cost?

General Grind – $10 – $30 Per Metre*

Coating Removal – $10 – $60 Per Metre*

On average Concrete Grinding Skirtings Costs $10 – $30 Per Metre* for jobs that require a General Grind.

On average Concrete Grinding Skirtings Costs $10 – $60 Per Metre* for jobs that require a Coating Removal.

These are the factors that we take into account when quoting:
– How many metres require Hand Grinding
– How many MM may need to be ground down
– The LENGTH and WIDTH of the Skirting Boards
– Access to the site (LIFT or STAIRS? and what LEVEL?)
– How Thick the Residue is underneath the Pebblecrete
– The condition of the concrete that requires Hand Grinding
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– What installation method was used (Glued, Screed, Cement, Sand & Cement, Double Layer)

These prices may vary depending on a large range of factors though, so please only use this as a general guide

How Much Does It Cost To Remove Pebblecrete From Your Unit Block Wall Skirting Boards

$50 Per Metre*

At Pebblecrete Removal Sydney we charge $50 per metre* for the removal of Pebblecrete Skirting Boards (Unit Block Walls).

These are the factors that we take into account when quoting:
– How many metres require Pebblecrete Removal
– The LENGTH and WIDTH of the High Rise Skirtings
– Access to the site (LIFT or STAIRS? and what LEVEL?)
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– Scaffolding is required for this type of work at the customer’s expense
– What installation method was used (Glued, Screed, Cement, Sand & Cement, Double Layer)

These prices may vary depending on a large range of factors though, so please only use this as a general guide

How Much Does Concrete Grinding Unit Block Wall Skirting Boards Cost?

General Grind – $10 – $30 Per Metre*

Coating Removal – $10 – $60 Per Metre*

On average Concrete Grinding Unit Block Wall Skirtings Costs $10 – $30 Per Metre* for jobs that require a General Grind.

On average Concrete Grinding Unit Block Wall Skirtings Costs $10 – $60 Per Metre* for jobs that require a Coating Removal.

These are the factors that we take into account when quoting:
– How many metres require Hand Grinding
– How many MM may need to be ground down
– The LENGTH and WIDTH of the High Rise Skirtings
– Access to the site (LIFT or STAIRS? and what LEVEL?)
– How Thick the Residue is underneath the Pebblecrete
– The condition of the concrete that requires Hand Grinding
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– Scaffolding is required for this type of work at the customer’s expense
– What installation method was used (Glued, Screed, Cement, Sand & Cement, Double Layer)

These prices may vary depending on a large range of factors though, so please only use this as a general guide

How Much Does It Cost To Dispose Of Your Pebblecrete?

($150 – $750)

Here at Pebblecrete Removal Sydney, we take all your rubbish away with us for disposal at your local resource management centre. This saves our clients hundreds of dollars in hiring skip bins, as well as the frustration of the whole process of hiring one and having to have a skip bin sit in your front yard or strata unit block for days. (Depending on how many square metres of Pebblecrete you have will be the deciding factor on your disposal of waste charge.)