How Much Does Removing Epoxy From Concrete Cost?

Removing Epoxy From Concrete Costs:
($10 – $60 / Per Square Metre)* Including GST

These are the factors that we take into account when quoting:
– How many layers there are
– How thick the coating is (0 – 6mm)
– How many MM may need to be ground down
– The condition of the epoxy that requires Removal
– How many square metres require Concrete Grinding
– Access to the site (LIFT or STAIRS? and what LEVEL?)
– What level is the property on? (Access to the property)
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– What service is required (Line Marking Removal or Coating Removal?)

How Much Does Removing Epoxy From Concrete Cost Per Square Metre?

$10 – $60 Per Square Metre*

How Much Does Epoxy Removal Cost Per Square Metre? Epoxy Removal costs vary quite a lot from company to company or private contractor to private contractor. Here at Epoxy Removal Sydney, we guarantee that we will always be upfront with pricing, with no hidden extras.

On average Removing Epoxy From Concrete (Coatings) Removal Costs $10 – $60 Per Square Metre.

On average Removing Epoxy From Concrete (Lines) Removal Costs $10 – $60 Per Square Metre.

On average Removing Epoxy From Concrete (Flakes) Removal Costs $10 – $60 Per Square Metre.

On average Removing Epoxy From Concrete (Paints) Removal Costs $10 – $60 Per Square Metre.

These are the factors that we take into account when quoting:
– How many layers there are
– How thick the coating is (0 – 6mm)
– How many MM may need to be ground down
– The condition of the epoxy that requires Removal
– How many square metres require Concrete Grinding
– Access to the site (LIFT or STAIRS? and what LEVEL?)
– What level is the property on? (Access to the property)
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– What service is required (Line Marking Removal or Coating Removal?)

Other Removing Epoxy From Concrete contractors and Concrete Grinding companies that Remive Epoxy do not meet the standards that we do at Removing Epoxy From Concrete Sydney We use only the highest quality products that are available on the market.

Here at Concrete Grinding Sydney, we come in and do a swift Floor Preparation and Concrete Grinding service for all of our clients, We Concrete Grind and Prime all floors before Floor Levelling to ensure a flawless installation without failure.

How Much Does Removing Epoxy From Concrete Stairs Cost?

$20 – $40 Per Step

$40 – $80 Per Landing

On average Concrete Grinding Stairs Costs $20 – $40 Per Step*

On average Concrete Grinding Landings Costs $40 – $80 Per Landing*

These are the factors that we take into account when quoting:
– How many MM may need to be ground off
– How thick the coating is (0 – 6mm) on the stairs
– How many layers there are (if a coating was applied)
– What level is the property on? (Access to the property)
– Access to the site (LIFT or STAIRS? and what LEVEL?)
– The condition of the concrete that requires Hand Grinding
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)
– What service is required (General Grind? Coating Removal? Flooring Removal?)
– How many STEPS and/or LANDINGS that require Hand Grinding and/or Removal
– The SIZE of the steps (Extra Wide or Extra Long Steps may increase the prices listed above)

These prices may vary depending on a large range of factors though, so please only use this as a general guide.

How Much Does Removing Epoxy From Concrete Skirting Boards Cost?

$10 – $60 Per Metre*

On average Concrete Grinding Skirtings Costs $10 – $30 Per Metre for jobs that require a General Grind.

On average Concrete Grinding Skirtings Costs $10 – $60 Per Metre for jobs that require a Coating Removal.

These are the factors that we take into account when quoting:
– How many metres require Hand Grinding
– How many MM may need to be ground off
– Access to the site (LIFT or STAIRS? and what LEVEL?)
– How many layers there are (if a coating was applied)
– What level is the property on? (Access to the property)
– What the height is of the skirtings that we need to grind
– How thick the coating is (0 – 6mm) on the on the skirtings
– The condition of the concrete that requires Hand Grinding
– What service is required (General Grind? Coating Removal?)
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)

These prices may vary depending on a large range of factors though, so please only use this as a general guide.

How Much Does Commercial Concrete Grinding Cost Per Square Metre

Commercial Concrete Grinding clients will receive larger discounts depending on how large the area is and what we are removing from the concrete. Here at Concrete Grinding Sydney, we guarantee that we will always be upfront with pricing, with no hidden extras.

On average Commercial Concrete Grinding Costs $5 – $15 Per Square Metre for jobs that require a General Grind.

On average Commercial Concrete Grinding Costs $5 – $20 Per Square Metre for jobs that require Coating Removals.

These are the factors that we take into account when quoting:
– How many layers there are
– How thick the coating is (0 – 6mm)
– How many MM may need to be ground down
– How many square metres require Concrete Grinding
– Access to the site (LIFT or STAIRS? and what LEVEL?)
– What level is the property on? (Access to the property)
– What service is required (General Grind? Coating Removal?)
– The condition of the concrete that requires Concrete Grinding
– What level of power can be provided? (10AMP > 15AMP OR 3PHASE)

These prices may vary depending on a large range of factors though, so please only use this as a general guide.